The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive®, 18" woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.
| Power Rating | : | 1500 Watts Peak
LF: Dual-Bridged Technology™, Class D | |
| Frequency Range | : | 31 Hz – 220 Hz | |
Dimensions
(H x W x D) | : | 508 mm x 597 mm x 749 mm
(20.0 in x 23.5 in x 29.5 in) | |
| Frequency Response | : | 34 Hz – 220 Hz | |
| Maximum Peak Output | : | 126 dB SPL at 1m | |
| Bandpass Nominal Impedance | : | LF: 2 x 2 ohms | |
| LF Driver | : | 1 x JBL 2268FF 457 mm (18 in) dual voice coil
Differential Drive® woofer with neodymium-magnet | |
| Audio Input Connector | : | XLR with loop through | |
| User Controls | : | Input Attenuator (0-16 dB)
Selectable 80 Hz or 120 Hz Low Pass
80 Hz High-Pass enable/disable for XLR loop thru. | |
| Signal Processing | : | DSP based, resident in Input Module | |
| System Management | : | DSP based limiters for mechanical and thermal protection | |
| AC Power Operating Range | : | 90-132 VAC or 216-264 VAC, 50/60Hz | |
| AC Line Voltage | : | User selectable: 120V/240V (-15%, +10%) | |
| AC Input Connector | : | Neutrik PowerCon (NAC 3MPA) | |
| AC Loop Through Connector | : | Neutrik PowerCon (NAC 3MPB) | |
| AC Current Requirements | : | 6A per system at 120V, 3A per system at 240V | |
| Enclosure | : | 18 mm birch plywood. | |
| Suspension / Mounting | : | Optional VRX-AF line-array frame kit or 10 mm forged eyebolts | |
| Finish | : | Black DuraFlex™ finish | |
| Grille | : | Powder coated, black, 16-gauge perforated steel with
acoustically transparent foam | |
| Net Weight | : | 38.5 kg (85 lb) | |
