Earthworks FW730 FlexWand Series Cardioid Microphone 7ft Model With Solid Round Base Black

SKU: FW730
$2,659.00
Out of Stock, contact for ETA
NOTIFY ME WHEN BACK IN STOCK
Description

The Earthworks Audio FW730 FlexWand is a combination of a High Definition Cardioid Microphone and a low profile microphone stand and boom as a single unit. The microphone features 20Hz to 30kHz frequency response with a uniform, near perfect polar response and the ability to reject sounds from the rear of the mic. There are no visible wires or cables above floor level. Visually it is low profile, smooth, sleek and clean. The FlexWand is the ideal solution for applications where the utmost in sound quality and a low profile is required. Now you don’t have to find a mic, attach the mic clip to the stand and then dress the cable around the stand. Just pick up the Earthworks Audio FW730, position it and plug the mic cable into the base. Perfect for choirs, drum overheads etc.

The FlexWand™ has a large flex section near the center of the stand that couples the stand and the wand. There is also a mini-gooseneck between the end of the wand and the microphone head. The lower section of the stand is 3/4” in diameter and the 24 inch wand is 5/16” in diameter with a 4.5” mini-gooseneck connected at the end which connects to the microphone head. The combination of a mid-flex section and the mini-flex on the wand provide precise aiming and an infinite combination of placement options between 1.5 ft and 7 ft. The stand itself is fitted with a round metal base.

Specifications


FREQUENCY RESPONSE 20Hz – 30kHz
POLAR PATTERN Cardioid
SENSITIVITY 10mV/Pa (-40dBV/Pa)
POWER REQUIREMENTS 24-48V Phantom, 10mA
SIGNAL TO NOISE RATIO 78dB (A-weighted)
PEAK ACOUSTIC INPUT 145dB SPL
OUTPUT XLR (pin 2+)
OUTPUT IMPEDANCE 65Ω balanced (between pins 2 & 3)
MIN OUTPUT LOAD 600Ω between pins 2 & 3
SELF NOISE 16dB SPL equivalent (A weighted)
DIMENSIONS Stand 7’ 2” long (2.18m), Base 12” (30.5cm) in diameter, (2.7cm) high
POSITIONING RANGE From 1′ 6″ to 7′ above floor level
WEIGHT Stand 2 lbs. (.9 kg), Base 12.6 lbs. (5.7kg)